Publikationen von P. van Eeten

Bykov, V.; Schauer, F.; Egorov, K.; van Eeten, P.; Fellinger, J.; Sochor, M.; Jaksic, N.; Tereshchenko, A.; Dübner, A.; Dudek, A. et al.; Zacharias, D.; Hathiramani, D.; Czarkowski, P.; Yang, Q.; Bergmann, T.; Freundt, S.: Structural analysis of W7-X: From design to assembly and operation. Fusion Engineering and Design 86 (6-8), S. 645 - 650 (2011)

Dudek, A.; Benndorf, A.; Bykov, V.; van Eeten, P.; Fellinger, J.; Hathiramani, D.; Höchel, K.; Kuse, D.; Meisel, F.; Padelt, S. et al.; Pilopp, D.; Schülke, M.; Sonnerup, L.; Schauer, F.: Bolted coil support at the W7-X module interface. Fusion Engineering and Design 86 (6-8), S. 1402 - 1405 (2011)

Jaksic, N.; van Eeten, P.; Bykov, V.; Schauer, F.: Analysis of the magnet support structure for the plasma fusion experiment Wendelstein 7-X. Computers and Structures 89 (11-12), S. 1177 - 1191 (2011)

Brakel, R.; Baylard, C.; Hartmann, D.; Pilopp, D.; Greve, H.; Herold, F.; van Eeten, P.: Component Design in Tight Areas in the Cryostat of W7-X - Configuration Management and Control. IEEE Transactions on Plasma Science 38 (3), S. 346 - 351 (2010)

Brakel, R.; van Eeten, P.; Hartmann, D. A.; Henkelmann, K.; Knauer, J.; Müller, K.; Okkenga-Wolf, A.; Wenzel, U.: Configuration management for Wendelstein 7-X. Fusion Engineering and Design 84 (2-6), S. 505 - 508 (2009)

Bykov, V.; Schauer, F.; Egorov, K.; Tereshchenko, A.; van Eeten, P.; Dübner, A.; Sochor, M.; Zacharias, D.; Dudek, A.; Chen, W. et al.; Czarkowski, P.; Sonnerup, L.; Fellinger, J.; Hathiramani, D.; Ye, M. Y.; Dänner, W.; W7-X Team: Structural analysis of W7-X: Overview. Fusion Engineering and Design 84 (2-6), S. 215 - 219 (2009)

Egorov, K.; Bykov, V.; Schauer, F.; van Eeten, P.: Structural analysis of Wendelstein 7-X magnet weigth supports. Fusion Engineering and Design 84 (2-6), S. 722 - 728 (2009)

Hathiramani, D.; Lingertat, J.; van Eeten, P.; Sochor, M.; Laux, M.; Bykov, V.; Schauer, F.; Heinemann, B.; Junghanns, P.; Brenner, A. et al.; Zauner, C.; Langer, H.: Full-scale friction test on tilted sliding bearings for Wendelstein 7-X coils. Fusion Engineering and Design 84 (2-6), S. 899 - 902 (2009)

Koppe, T.; Cardella, A.; Reich, J.; Missal, B.; Hein, B.; Krause, R.; Jenzsch, H.; Hermann, D.; Schrader, M.; van Eeten, P. et al.; Di Bartolo, G.; Leher, F.; Binni, A.; Segl, J.; Camin, R.; Giordano, L.; Egloff, B.; Ridzewski, J.; Corniani, G.: Manufacturing and assembly status of main components of the Wendelstein 7-X cryostat. Fusion Engineering and Design 84 (7-11), S. 1099 - 1103 (2009)

Zauner, C.; Langer, H.; Hathiramani, D.; Lingertat, J.; van Eeten, P.; Bykov, V.; Schauer, F.; Heinemann, B.; Junghanns, P.: Acoustic monitoring of superconducting magnet component test and shock simulation of coils. Fusion Engineering and Design 84 (7-11), S. 2042 - 2047 (2009)

Bykov, V.; Schauer, F.; Egorov, K.; van Eeten, P.; Damiani, C.; Dübner, A.; Sochor, M.; Sonnerup, L.; Capriccioli, A.; Tereshchenko, A. et al.; Jaksic, N.; Dänner, W.; Rumyancev, M.; Zacharias, D.: Structural analysis of W7-X: Main results and critical issues. Fusion Engineering and Design 82, S. 1538 - 1548 (2007)

Brakel, R.; Baylard, C.; Greve, H.; Hartmann, D. A.; Herold, F.; Pilopp, D.; van Eeten, P.; W7-X Team: Component Design in Tight Areas in the Cryostat of W7-X - Configuration Management and Control. In: Proceedings of the 36th International Conference on Plasma Science and 23rd Symposium on Fusion Engineering (ICOPS/SOFE 2009), SO3C-1. 36th International Conference on Plasma Science and 23rd Symposium on Fusion Engineering (ICOPS/SOFE 2009), San Diego, CA, 31. Mai 2009 - 04. Juni 2009. IEEE (2009)

Damiani, C.; Bäumel, S.; Benndorf, A.; Bykov, V.; Cardella, A.; Dänner, W.; Dübner, A.; Dudek, A.; Gardebrecht, W.; Gasparotto, M. et al.; Giesen, B.; Hartmann, D.; Heinemann, B.; Holtum, D.; Hurd, F.; Koch, F.; Junghanns, P.; Lennartz, M.; Lingertat, J.; Mendelevitch, B.; Panin, A.; Pilopp, D.; Reisgen, U.; Sonnerup, L.; Tretter, J.; van Eeten, P.; Wendorf, J.: Design and test of the support elements of the W7-X magnet system. In: Proceedings 21st IEEE/NPSS Symposium on Fusion Engineering, 04_10. 21st IEEE/NPSS Symposium on Fusion Engineering (SOFE 05), Knoxville, TN, 26. September 2005 - 29. September 2005. IEEE, Piscataway, NJ (2006)

Jaksic, N.; van Eeten, P.; Bykov, V.; Schauer, F.: Analysis of the magnet support structure for the plasma fusion experiment Wendelstein 7-X. 6th M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, MA (2011)

Jaksic, N.; Simon-Weidner, J.; Schauer, F.; van Eeten, P.; Sochor, M.: Simulation of Complex Non-Linear Structures in Large Scale Analysis. NAFEMS National Agency for Finite Element Methods and Standards World Congress 2009, Crete (2009)

Brakel, R.; Baylard, C.; Hartmann, D.; Pilopp, D.; Greve, H.; Herold, F.; van Eeten, P.: Component Design in Tight Areas in the Cryostat of W7-X - Configuration Management and Control. 36th International Conference on Plasma Science and 23rd Symposium on Fusion Engineering (ICOPS/SOFE 2009), San Diego, CA (2009)

Damiani, C.; Bäumel, S.; Benndorf, A.; Bykov, V.; Cardella, A.; Dänner, W.; Dübner, A.; Dudek, A.; Gardebrecht, W.; Gasparotto, M. et al.; Giesen, B.; Hartmann, D.; Heinemann, B.; Holtum, D.; Hurd, F.; Koch, F.; Junghanns, P.; Lennartz, M.; Lingertat, J.; Mendelevitch, B.; Panin, A.; Pilopp, D.; Reisgen, U.; Sonnerup, L.; Tretter, J.; van Eeten, P.; Wendorf, J.: Design and test of the support elements of the W7-X magnet system. 21st IEEE/NPSS Symposium on Fusion Engineering (SOFE), Knoxville,TN (2005)

Vilbrandt, R.; Bosch, H.-S.; van Eeten, P.: Risk management as an executive task in the construction of Wendelstein 7-X. 27th Symposium on Fusion Technology (SOFT 2012), Liège (2012)

Bykov, V.; Schauer, F.; Egorov, K.; van Eeten, P.; Fellinger, J.; Sochor, M.; Jaksic, N.; Tereshchenko, A.; Dübner, A.; Dudek, A. et al.; Zacharias, D.; Hathiramani, D.; Czarkowski, P.; Yang, Q.: Structural Analysis of W7-X: From design to assembly and operation. 26th Symposium on Fusion Technology (SOFT 2010), Porto (2010)

Dudek, A.; Benndorf, A.; Bykov, V.; van Eeten, P.; Fellinger, J.; Hathiramani, D.; Kuse, D.; Meisel, F.; Padelt, S.; Pilopp, D. et al.; Schauer, F.; Sonnerup, L.: Bolted coil support at the W7-X module interface. 26th Symposium on Fusion Technology (SOFT 2010), Porto (2010)